Natural Stone Care Guide: Keeping Stone Beautiful for Years

Natural stone is valued as much for its durability as for the character it brings to a space. To preserve that beauty for years, however, it needs the right care. The wrong cleaning products or careless use can leave permanent stains and damage on stone surfaces.
Stones such as marble and travertine are porous, so liquids that reach the surface can be absorbed quickly and leave stains. Spills should be cleaned up immediately. Harsh chemicals should be avoided in favour of pH-neutral cleaners made specifically for natural stone; even on harder stones like granite, acidic products can dull the finish.
Regular protective treatments are another important part of stone care. They form an invisible barrier that slows moisture and dirt from penetrating the stone, which matters most in kitchens and bathrooms. Felt pads under furniture help prevent scratches, and professional honing and polishing can restore surfaces that have lost their shine over time.
How should natural stone be cleaned day to day?
Everyday care is simple; the key is to avoid the wrong products.
- Remove dust and grit regularly; sand acts like sandpaper on floors.
- Use lukewarm water and a pH-neutral cleaner suitable for stone, with a damp microfibre cloth or mop.
- Rinse and dry the surface with a clean cloth to reduce water marks and limescale.
- Do not use vinegar, lemon juice, limescale removers, bleach or abrasive creams and powders.
Why and how often should stone be sealed?
Impregnating sealers penetrate the stone's pores and slow the absorption of water and oil without leaving a glossy film. This reduces staining and makes cleaning easier.
How often to reseal depends on the stone's porosity and how heavily it is used. A simple water-drop test helps: if water left on the surface darkens the stone within a few minutes, it is time to reseal. Busy areas such as kitchen countertops and bathrooms should be checked more often.
How are stains and dull patches removed?
Oil stains can usually be drawn out with a poultice suitable for stone. Acid etching and deep scratches, however, are physical damage to the surface, so they are corrected by professional honing and polishing rather than by cleaning.
Simple habits such as felt pads under furniture legs, mats at entrances and never placing hot pans directly on the surface greatly reduce the need for maintenance.
A care schedule by area
Care needs vary with where the stone is and how heavily it is used. This schedule is a good starting point for most homes and commercial spaces:
- Kitchen countertops: wipe with a damp cloth after each use; do a water-drop test monthly and reseal when the test shows it is needed.
- Bathrooms: clean weekly with a pH-neutral product, dry surfaces after use, and check joints and silicone once a year.
- Interior floors: sweep or dust-mop daily, damp-clean weekly, and review high-traffic areas once a year.
- Outdoors: clear moss, leaves and soil at the change of seasons, and check joints and drainage before winter.
How care differs by stone type
Not every natural stone needs the same care. Marble and onyx are calcium carbonate-based and the most sensitive to acids, so lemon juice, vinegar and limescale removers should never be used on them, and spilled drinks should be wiped up immediately. Travertine's porous structure absorbs dirt and liquids more readily, and on filled surfaces the condition of the filler should be checked from time to time.
Granite and basalt are among the toughest stones. They are far more resistant to acids, but light-coloured, porous granites can still take oil stains, so sealing should not be neglected. Whatever the stone, the rule is the same: a pH-neutral cleaner, a soft cloth and quick action on spills.
When is professional care needed?
Dullness, deep scratches, acid etching and old stains that everyday cleaning cannot shift call for professional attention. Specialists renew the stone by honing and polishing it in stages, or by refinishing a matt surface, and then apply a protective sealer. In busy commercial spaces, scheduling this work at planned intervals keeps floors looking well cared for at all times.
Frequently Asked Questions
What should I use to clean a marble floor?
Lukewarm water and a pH-neutral cleaner suitable for natural stone are enough. Acidic products (vinegar, lemon, limescale remover) and bleach dull and discolour marble.
How often should natural stone be polished?
Polishing is done by professionals when the surface becomes worn; it is not a routine task. What is routine is resealing at intervals that depend on the stone's porosity.
Does granite need maintenance too?
Granite is far more durable than marble, but some light-coloured, porous granites can absorb oil. For these, an impregnating sealer and pH-neutral cleaning are recommended.
Can I use a steam cleaner on natural stone?
It is not recommended. High heat and steam can weaken the impregnating sealer and may cause problems in joints on some stones. A damp cloth and pH-neutral cleaner are enough.
